South Korea’s LS Cable & System (LS C&S) has won an order valued at $167 million to supply high-voltage, direct current (HVDC) cables for the Norfolk Boreas Offshore Wind Farm in the U.K.
A press release said the LS C&S order is from Sweden’s Vattenfall AB, which is one of Europe’s largest producers and retailers of electricity and heat. The order calls for 320 kV cables that will lie under the sea. The underground cables will use cross-linked polyethylene (XLPE) as an insulating material, which it described as a first.
Per multiple media reports, the Norfolk Boreas offshore cable corridor, using about 96 km, will include export cables to deliver the electricity supplied to the offshore substations to landfall that will be in the Happisburgh village in Norfolk county. The onshore part of the offshore wind farm development will include the installation of underground cables between an onshore substation related to the project and an existing substation of the national grid. The onshore cable corridor is expected to be 63 km.
Located 47 km off the Norfolk coast, Norfolk Boreas is the first of two stages of Vattenfall’s Norfolk Offshore Wind Zone. Per DEME Offshore, which is part of the project consortium with LS C&S, they have also been named a preferred supplier for the second part: the Norfolk Vanguard. Each wind farm will have a capacity of 1.8 GW.
“Only a handful of firms have succeeded in developing XLPE cables defined by easy installation, connection, maintenance and repair,” an LS Cable & System official said. “The cables are increasingly emerging as a mainstream product in the renewable industries of Europe and North America.”
Autac, a manufacturer of coiled cords founded by Robert N. Burkle in 1947, celebrated the company’s 75th anniversary with an event at Bill Miller’s Castle in Branford, Connecticut.
The event was hosted by company President Marie Burkle. “It is with a great sense of pride that we have come this far,” she told the audience of some 85 people, which included employees and their families/guests, suppliers, industry colleagues and state Senator Christine Cohen. “No business can make 75 years without relationships,” she said. For a business, that means employees, vendors and local community leaders. “All have helped us in different ways,” and that support enabled the company to survive and thrive.”
Burkle called up a number of employees to single them out for their contributions. Speaking later, she said, “It is a source of great pride for me, the last Burkle, to keep my father’s legacy going and certainly a reason to celebrate. The day was also an opportunity to give our staff the recognition they so deeply deserve.”
At the same time, Burkle shared different thoughts in her speech. She singled out some industry vendors, saying they could also be a company’s biggest liability. She cited the “80-20” rule, referring to the axiom that 80 percent of business often comes from 20 percent of customers.
In hard times, such as the last few Covid years, that has resulted in a much harder business atmosphere, Burkle said. “Our minimums increase, our prices go up, the lead times go out and payment terms become so unreasonable that it bankrupts many small businesses. How can one eat their young and hope to survive for more generations? I’ve never understood that.”
That assessment does not apply to all vendors, and Burkle thanked Mexichem for being a reliable business partner, presenting the company a plaque for their consistently good work.
Burkle said it was important for her to hold the event at Bill Miller’s Castle as the founder, the late Bill Miller, and her late father, were together in Rotary and the Chamber of Commerce back in the 60’s and 70’s. “Also, Bill Miller was a huge help and supporter of me when I served as president of the North Branford Chamber. He and that fabulous building have a special place in my heart!”
Autac, a manufacturer of coiled cords founded by Robert N. Burkle in 1947, celebrated the company’s 75th anniversary with an event at Bill Miller’s Castle in Branford, Connecticut.
The event was hosted by company President Marie Burkle. “It is with a great sense of pride that we have come this far,” she told the audience of some 85 people, which included employees and their families/guests, suppliers, industry colleagues and state Senator Christine Cohen. “No business can make 75 years without relationships,” she said. For a business, that means employees, vendors and local community leaders. “All have helped us in different ways,” and that support enabled the company to survive and thrive.”
Burkle called up a number of employees to single them out for their contributions. Speaking later, she said, “It is a source of great pride for me, the last Burkle, to keep my father’s legacy going and certainly a reason to celebrate. The day was also an opportunity to give our staff the recognition they so deeply deserve.”
At the same time, Burkle shared different thoughts in her speech. She singled out some industry vendors, saying they could also be a company’s biggest liability. She cited the “80-20” rule, referring to the axiom that 80 percent of business often comes from 20 percent of customers.
In hard times, such as the last few Covid years, that has resulted in a much harder business atmosphere, Burkle said. “Our minimums increase, our prices go up, the lead times go out and payment terms become so unreasonable that it bankrupts many small businesses. How can one eat their young and hope to survive for more generations? I’ve never understood that.”
That assessment does not apply to all vendors, and Burkle thanked Mexichem for being a reliable business partner, presenting the company a plaque for their consistently good work.
Burkle said it was important for her to hold the event at Bill Miller’s Castle as the founder, the late Bill Miller, and her late father, were together in Rotary and the Chamber of Commerce back in the 60’s and 70’s. “Also, Bill Miller was a huge help and supporter of me when I served as president of the North Branford Chamber. He and that fabulous building have a special place in my heart!”
WAI President James York and Executive Director Steve Fetteroll recently attended a meeting of ACIMAF, where the Italian wire machinery manufacturers association celebrated its 35th anniversary, heard a presentation by York (see p. 62) and discussed plans for a return to Italy for a technical conference in 2023.
The meeting included a presentation by Gabriele Campo, commercial and business development manager at BCUBE. She specializes in advanced logistics services, and her report was on “International logistics and shipments - State of the art - Possible scenarios and new solutions.” She focused on the transition from product centricity to customer centricity. She talked about how the evolution requires a supplier of logistics services to serve as a partner.
Also speaking was Alessia Bianchi of ITA/ICE, who shifted the focus to the Agency’s initiatives to support promotion abroad, and the internationalization of Italian companies. In her speech, she disclosed that Italian SMEs are leaders in international markets, and that those who export (over 123,000 throughout Italy) are larger in size and perform better in terms of turnover per employee and productivity, since competing internationally requires a company to be well structured and efficient.
Promos Italia, a national agency that supports Italian companies, was represented by Silvia Lambertini, who presented the services that are offered, such as training, business matching, digital export solutions and projects to attract foreign investment and territorial development. Promis Italia had been a partner of ACIMAF previously when it held Wire & Cable in Verona in 2019. That event attracted 250 delegates from 27 countries. He gave a taste of what the 2023 staging of the conference would be like.
ACIMAF President Ferruccio Bellina, Fetteroll and York spoke about plans for the return to Italy, this time in Milano. Observed Fetteroll, “There is a collaboration by WAI with ACIMAF that has lasted for 20 years, and we are pleased to contribute to this event because it is so well in line with the technical focus of our association.”
The date of Oct. 16, 2023, has been set for the technical conference, and more details will follow in future issues
The WAI’s Clockwinding tradition traces back to 1948, when John Rigby first wound the stately Grandfather’s Clock that the British wire drawing industry presented to the Association for help during World War II.
Over the years, many individuals have served as the Clockwinder, but the 2022 Clockwinder, Martin Thacker, has set himself apart from all others: he is the first-ever Clockwinder to serve three years in a row, and he is the first one to have ever performed the duties virtually. On Nov. 3, he came to WAI’s office in Madison, Connecticut, having performed the duties of the ceremony two times before ... yet never having actually touched the clock, as he was home in the U.K., and the clock was wound by a WAI representative in his stead.
Welcomed and introduced by WAI President Jim York, Thacker—who twice was a polished and congenial speaker remotely—was even better in person. “This is my third clockwinding ceremony. In 2020, I was privileged to be asked to wind the clock. However, Covid got in the way and travel became impossible. I was able to complete the ceremony by virtual means. I am the first in the history of our tradition to wind such a prestigious clock through MS Teams.”
Thacker spoke about the Clockwinding tradition, noting that it was important that it was able to continue in some form during an onerous Covid period. “Challenges remain, but 2022 has largely seen a thriving wire and cable industry. Major telecoms continue to expand their networks, and more organizations are adopting industry 4.0 technologies, and demand is strong for fiber optic cables and hybrid cables. More wire and cable trade shows have taken place this year, and they remain “a great place to network, see the latest technology in action and find new partners,” he said.
Thacker observed later that when he was presented a Clockwinder’s tie at an event in the U.K. honoring past Clockwinders by WAI Executive Director Steve Fetteroll—who was there with WAI President Jim York after going to wire Düsseldorf 2022 in Germany—it had been an awkward moment. “I felt a fraud since I had fast become king of the virtual clockwinding ceremony. Now, having been here in Madison, I can now wear my tie with pride.”
Of note, only one past Clockwinder has wound the clock more than Thacker, and that is the late Terrence Cahill, Somerset Wire, who performed the tradition in 1979, 1989, 1991 and 1997.
Poland’s WAI Chapter held a seminar on Oct. 19 that included a technical presentation and an update on the chapter, but the main focus was a series of laudations of the late Dr. Bogdan Golis, a beloved chapter member who died June 29 at age 85.
The program traced the career of Golis, who was Częstochowa University of Technology (CUT)’s dean of faculty for metallurgy, and head of the Department of Metal Forming in this faculty, from 1988-96. He became a WAI member in 1995 and was vice president of the Poland Chapter from 1999 to 2010. In 2000 he won WAI’s Mordica Memorial Award. He was named a full CUT professor in 2001, and won several key awards. He was also the driving force behind the 2006 creation of the Schneider Memorial Award, the highest such award for Poland, based on WAI’s Mordica Award.
The honorary guests of the seminar were Professor Bogdan’s wife, Leokadia Golis, and daughters Małgorzata Zaczkowska and Beata Pająk, granddaughter Agnieszka Pająk and grandson Wojciech Pająk.
Many people came to honor Golis, one being Tadeusz Knych, also a Mordica Memorial Award winner, who said that the professor was always a deep-thinking man who firmly believed that there was a need to further knowledge. “He was always a deeply thinking man with a great knowledge of drawing, he evoked respect. He was often uncompromising, in a positive sense, of course. ... He always showed concern for science and the fear that (there was an) increasing lack of interest in science in our area of professional interest, and therefore he tried to put on paper all the knowledge he had in the theory and technology of the drawing process. He has always required exceptional respect for professors, he taught it and demanded it from young students of science. He left a huge baggage of knowledge and memories. ... It’s good that he lived to see the 20th anniversary of WAI in Poland. He was a man of character and great charisma, and his contributions should never be forgotten.”
The leaders of the WAI Poland Chapter were also announced. Jan Pilarczyk, retired CUT Professor, will continue to serve as president. There are three vice presidents: Maciej Górak, owner of the Gama Metal Company; Prof. Tadeusz Knych, dean of the Faculty of Non-Ferrous Metals at AGH; and Piotr Milewski, commodity manager for Drumet Wire Co World Group, who is also the 2022 president of the European Wire Drawing Committee. Prof. Jarosław Jasiński, professor at NCBJ, will be treasurer; Agnieszka Gwiazdowicz will be board secretary; and Prof. AGH Beata Smyrak, a professor at AGH, will also be a member of the board.
Attendees of the tour of the Radio Frequency Systems (RFS) plant in Meriden, Connecticut got very positive reviews from the New England Chapter.
The Oct. 25 tour saw some 50 chapter members and guests see the operations up close of RFS, which is a global designer and manufacturer of total-package solutions for wireless and broadcast infrastructure. The tour started with a half hour presentation on the markets that the company serves, followed by the tour.
The opening main presentation was delivered by RFS product line managers. They provided a brief overview of RFS’ history, key markets, and telecom growth. The tour stopped at four stations that collectively covered manufacturing of coaxial cables, fiber optic assemblies, fiber/power hybrid cables, broadcast antennas, and microwave antennas. At each station, a subject matter expert explained what their department did. RFS had samples on hand for show and tell in each area. Attendees were randomly split up into groups of 10-15 and rotated through the stations, spending about 15 minutes in each area of the factory.
After the tour concluded, everyone regrouped down the road at River: A Waterfront Restaurant & Bar for what proved to be enjoyable dinner experience just steps away from the Connecticut River.
One attendee who especially enjoyed the event was LeeAnn Chen, strategic marketing director for AlphaGary. “As a newcomer to the wire and cable field, this is a great way to get firsthand and live experience, with great networking opportunity,” she said, adding that RFS did a superb job preparing the tour. “I was touched by everyone’s passion and expertise on their subjects!” Finally, she said that the dinner-reception that followed was also memorable. “The mist over the Connecticut river was an added touch to the evening!”
The regional networking event is a fundraiser for the WAI New England Chapter Scholarship Fund. Registration is now open through WAI’s event registration system. The cost is $140, and WAI Chapter members in good standing receive discounted rates. Please use your discount code or contact This email address is being protected from spambots. You need JavaScript enabled to view it. for assistance with registration.
The event will again be held this year inside the Cabaret Theatre. The reception starts at 5:30 pm, followed by the meeting at 6:35 pm. The dinner program will include a guest speaker, the introduction of the 2023 new chapter president and board, and picking of the raffle winners.
All proceeds from the raffle go directly to the Chapter’s scholarship program, and attendees are encouraged to bring prizes to help the cause. All such offerings should include an attached business card so the provider can be recognized during the drawing. There will also be a photo booth, so be prepared to grab your industry friends for some memorable pictures. There will be casino-themed props, but you can also get a professional head shot with a WAI backdrop.
Sponsors are always welcome, and the different levels for the event are: platinum-$500, gold-$350, silver-$250 and bronze-$150. All sponsors will be recognized at the event and in WJI. Sponsorships can be selected during the event registration and must be paid at that point. New sponsors are asked to provide a high-quality file of your company logo. Please direct sponsorship questions to WAI’s John Markowski at This email address is being protected from spambots. You need JavaScript enabled to view it. or by calling 203-458-4044.
Of note for the 2023 meeting, the Mohegan Sun Resort & Casino has a room block set aside for attendees who wish to stay overnight. The discounted rate is for the Earth Tower the nights of Jan. 25-26. The cut-off date is Jan. 4, 2023. Reservations can be made online at https://book.passkey.com/go/WAINE23, or call 888-226-7711 for a reservation, using code WAINE23.
Hires & promotions
Terry Hughes has been named district sales manager for Nucor Steel Connecticut. He worked in key positions for 18 years for Bekaert Corporation, most recently as director of North American Procurement. Prior to that he was operations manager for Arcelor Corporation for 18 years. He holds a degree in materials engineering from Youngstown State University and an MBA in marketing from Kent State University. Based in Charlotte, North Carolina, Nucor Corp. is the largest U.S. steel producer.
Hitachi Cable America Inc. (HCA) has named Joe Barry as COO of the Performance Cable Systems and Materials (PCSM) division based in Manchester, New Hampshire. He has decades of experience leading various engineering and business functions in well-known wire and cable manufacturing companies. He worked most recently as the CEO at Marmon Holdings, was president and general manager of Comtran Cable LLC, and held multiple senior positions at Belden Inc. He succeeds Tom Artinian, who served in that position for just two years and has since taken over as COO and president for the Automotive Products Division for both the Indiana and Mexico divisions. Hitachi Cable America Inc. (HCA)—which on Jan. 4, 2023, will become Proterial Cable America, Inc.—is a leading manufacturer of copper and fiber optic communication cables for the telecom industry.
Omni Cable, LLC has named Dan Van Belle as Northeast Regional Vice President, a new position that will see him responsible for the company’s Boston, Cincinnati and Philadelphia branches. He has more than 25 years of industry experience. He began his career with Houston Wire & Cable (HWC) in sales. During his tenure there, he served as the Charlotte regional manager, then was promoted to Southeast regional vice president. HWC was acquired by OmniCable in 2021. Based in West Chester, Pennsylvania, OmniCable is redistributor of electrical wire and cable and related services.
Aaron Overmann has been named leader tactical buyers North America for Bridon-Bekaert The Ropes Group. He started with the company as a tactical buyer in July 2021. He previously was a strategic sourcing manager at DBi Services, Inc., and prior to that was a supply chain specialist for MTF Biologics for 16 years. Bridon-Bekaert Ropes Group, a division of Bekaert, is a premier supplier of mission-critical advanced cords and ropes.
OTECH Corporation finalized some key management changes following the Oct. 1 passing of Jack O’Donnell, who started the company in 1999 and served as president and CEO. Executive Vice President of Operations and Acting CEO Jason Page has been named CEO of the organization. The industry veteran has worked for OTECH for 20 years, with 10 years of leadership roles. Vice President Strategic & Business Development and Acting President Ted Irvine has been named president of OTECH. He joined the company in 2017 and has 35 years of plastics experience in key account sales, management, executive leadership and marketing. Based in Rolling Prairie, Indiana, OTECH Corporation develops, designs and custom manufactures high-quality specialty PVC compounds, thermoplastic elastomers and alloys used in electrical wire and cable.
Cooper Runzel has been promoted to director of manufacturing for Lake Cable LLC. He joined the company as a line operator in 2008, and was promoted to maintenance technician, quality technician, process technician, plant manager, corporate operations manager and director of operations. Based in Bensenville, Illinois, Lake Cable LLC manufactures a range of electrical wire and cable.
Service Wire reported two recent positions. Scott Olson has joined the company as director of sales in the Phoenix sales office. He previously was an executive national account manager for MRC Global, which he joined in 2007. He holds a B.S. degree in finance from the Mays Business School at Texas A&M University. Jeff Anderson is a strategic account manager in the Houston sales office. A graduate of Morehouse College and National University, he has more than six years of experience in local and national corporate account management, most recently as national account manager for MRC Global. Based in Culloden, West Virginia, Service Wire Co. supplies electrical wire and cable.
Deborah Musselman has been named digital merchandising manager at Allied Wire & Cable. She joined the company in 2018 as an IT assistant and was promoted to Technical SEO specialist. She holds a degree in mathematics and computer science from Ursinus College. Based in Collegeville, Pennsylvania, Allied Wire & Cable is an independently operated, specialty manufacturer and distributor of electrical wire, cable, tubing, and accessories.
Obituaries
“Fred” Schwelm, a a long time industry veteran, died in California just shy of his 95th birthday. He spent more than 50 years in the steel wire business. He worked for J. Gerber & Co., which was then an import agent for Bekaert, rising to the role of president of Bekaert Northeast Sales, a joint venture between Gerber and Bekaert. He was based in New York City except for a period (1950-52) when he was at the J. Gerber offices in Japan.
A German refugee, Hartoch arrived penniless with his family in New York a year after witnessing the atrocities of Kristallnacht. He attended the Bronx High School of Science and then night school in business administration at City College.
Hartoch was respected by all who knew him for his sales prowess and technical knowledge of steel wire. Despite some harsh years, he almost always met his sales and profit budget figures, and was recognized by his colleagues. He taught his salespeople all aspects of ferrous wire, but more importantly, about the ethics of doing business. He prompted his sales staff to think and solve problems rather than just giving them the answers to their questions. He will be remembered for his kindness, honesty, sense of humor and keen sense of history and world events.
Anthony “Tony” Dolce, the founder of T&T Marketing, died Oct. 29 in Hackettstown, New Jersey, at age 94. In 1988, he retired from BP Performance Polymers as vice president of sales and marketing, then the next year launched T&T Marketing. He was joined by son-in-law Tom Jordan, and the two men built the company into a leading, dedicated wire and cable distributor of resins and polymers in North America. Dolce, who was part of the business for 25 years before retiring at age 85, said that those years were the best of his career. T&T Marketing was bought by M. Holland Company in 2017.
Prior to T&T, Dolce held positions with British Petroleum as vice president of sales and Reichold Chemicals as vice president of sales and sales manager. Earlier in his career, he held process engineering and chemist positions with Reynolds Metals, Kaiser Aluminum, and U.S. Rubber. He held a degree in chemistry from Providence College. The WAI Life Member was a 2008 recipient of the WCMA Distinguished Career Award.
Dolce had been predeceased by Theresa, his wife of 70 years, earlier in October. Survivors include three daughters: Laura Jordan, Anne Dolce and Marie Dolce; two grandchildren; and one great grandchild.
Alloy Wire International reported news of two personnel changes. Mark Venable has been promoted to chairman. He joined the company as a managing director designate in 2010, and a year later became managing director, a position held to his promotion. He previously had in different sales roles for 21 years for the Brockmoor Foundry. Filling the managing director post is Tom Mander, who has worked for the company for more than 17 years. He was named managing director designate in 2021. Based in the West Midlands, U.K., Alloy Wire International manufactures wire and wire rope for a wide range of markets.
Cody Buhle has been named national sales manager for non-contact speed and length-measuring products for Proton Products Inc. He joined the U.S. Navy, where he became a basic electricity and electronics technician. He has considerable private sector sales and engineer experience. He worked for several companies as a field service engineer and as a technical sales manager, a position he most recently held for BST eltromat International GmbH in the U.S. Based in the U.K. and U.S., Proton Products supplies instrumentation and control equipment for use in industrial production.
Chroma Color Corporation has promoted Clayton Tyler to sales director for the Eastern Region. He joined the company in 2020 as a regional market manager with extensive prior experience. He most recently worked for Lyondell Basell as a business development manager. Prior to that, he worked for A. Schulman, Inc., Clariant and ECM Plastics, Inc. The company also named Joel Neely as an account manager. He has had a successful track record selling color and additives to a wide variety of leading plastics convertors. He holds a degree in marketing from Southern Illinois University, Carbondale. Based in McHenry, Illinois, Chroma Color Corporation supplies specialty color and additive concentrates to markets that include wire and cable.
Holger Lieder, director of sales at Sikora AG, has taken on additional duties: interim responsibility for the areas of marketing and service. In this function, he will directly report to CEO Dr. Christian Frank. He joined the company in 2004, and now assumes the responsibilities previously held by Dr. Jörg Wissdorf, a member of the Executive Board who is taking on new professional challenges. Based in Bremen, Germany, Sikora AG supplies measuring, control, inspection, analysis and sorting devices for wire and cable.
Alain Hawaux, well known in North America for being the after-sales service manager of Gauder Group, Inc., has been promoted to president of Gauder Group, Inc. He has been with the company for 24 years, and while he will continue in his prior role, he will now be able to help consolidate and implement new strategies for Setic S.A.S in North America. He will also be a constructive adviser for both Setic S.A.S and customers. Based in Lewisville, North Carolina, Gauder Group, Inc. is the Setic SAS, Pourtier and C2S representative in North America for rotating equipment made by Setic and Pourtier.
The SAMP Group recently hired Paolo Stefini, a leading expert in aluminum metallurgical processes, as its product manager aluminum. He has more than 20 years of experience that encompassing all elements of manufacturing aluminum wires and alloys for use in the following fields: electric applications, the automotive industry, mechanical deformation, and welding. Prior to joining SAMP, he worked for companies that included the Travar Tec-ECN Cunext Group. Based in Bentivoglio, Italy, and with manufacturing sites in Italy, China and Brazil, and sales agents and service centers all over the world, the SAMP Group manufactures a wide range of wire and cable machinery. n
Obituaries
Frederick “Fred” Schwelm, a well-known retired industry veteran, died Sept. 29 at age 75. The Wire & Cable Manufacturers Alliance (WCMA) outlined the extensive career of Schwelm, who was a WCMA founding board member and a 1997 recipient of the Charles D. Scott Distinguished Career Award, now the WCMA Distinguished Career Award. In 1973, Schwelm began his career at Cornish Wire in Williamstown, Massachusetts. He was responsible for the plant/process engineering for the three plants of the company, which at the time was a division of General Cable. He joined Rockbetos in 1979 as operations manager at the plant in East Granby, Connecticut. In 1983, he joined BIW Cable as vice president of manufacturing. In 1988 Draka purchased BIW and he became vice president of operations for the Draka companies. In 1993, he rejoined Rockbestos, which was owned by Marmon Group, as president. During 1996 and 1997, Marmon acquired Surprenant Cable, and Schwelm lead the merger of Rockbestos and Surprenant, now RSCC Wire and Cable. He is survived by his wife of 52 years, Clare; daughters Nicole and Gretchen; and three grandchildren.
Charles (Chuck) Lovenguth, a retired key leader at International Wire, died Oct. 3 at age 81, at Anthology Senior Living, King of Prussia, Pennsylvania. He started his career at Camden Wire Co., left to earn a business degree, and then returned to Camden Wire as a machine operator. He was promoted to production manager, and in 1992 he joined Omega Wire as a sales manager. He was promoted and held the position of vice president of sales when the company became part of International Wire. He eventually became vice president of sales and marketing for International Wire’s Noninsulated Wire Division, which included the consolidated operations of Camden Wire, Omega Wire, Auburn Wire and Continental Cordage. A 1997 recipient of the Charles D. Scott Distinguished Career Award, he was a Life Member of Wire Association International and a Member of the American Copper Council. He is survived by three sons: Marc, Chris and Jason; a sister, Carol; three brothers: Gary, Brian and Mike; and many grandchildren, nieces and nephews.
John “Jack” Edward O’Donnell II, the founder of O’Tech Industries, died Oct. 1, at age 63. O’Donnell earned a B.S. degree in chemistry from Holy Cross College, then moved to Chicago where he worked in several sales roles. While he and two buddies from Holy Cross entered the bar business (Mamie Rileys on Clark Street and later The Hidden Shamrock on Halsted), his passion for sales and chemistry led him to become a manufacturer’s representative for Gary Chemical Corporation, a thermoplastic compounding company in Leominster, Massachusetts. In 1999, he founded O’Tech Industries in Rolling Prairie, Indiana, where he served as President and CEO. The company flourished as a specialty compounding business with multiple subsidiaries, which includes Color Resource in Leominster. His strong work ethic and passion for his business were instrumental to his success. He is survived by his wife of 34 years, Laurel Davenport O’Donnell; a son John III “Jack”; three daughters, Jesse, Lia and Lucy; and three brothers, Doug, Gregg and Mark.
How to resolve AdBlock issue?