How to resolve AdBlock issue? × Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!
Staple cement
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
11 years 10 months ago #1878 by Archived Forum Admin
Staple cement was created by Archived Forum Admin
We are looking for a staple cement to be used in dramix production.Do you know any producers or
suppliers from any country? Thanks for taking your time to answer this query.
suppliers from any country? Thanks for taking your time to answer this query.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
11 years 10 months ago #1879 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Staple cement
Hello there,
A quick check on the Internet provided us with two suppliers/ manufacturers of staple cement in the United States. The web reference pages are below:
1) The Rohm and Haas Company
www.rohmhaas.com/
2)Dianal America, Inc. a division of Mitsubishi Rayon Co. Ltd.,
www.dianal.com/Coatings/applications.html
I trust this is all you need but we do have one academic question.
We were under the impression that Bekaert Dramix® steel filaments came loose in bags. Why is the staple cement used? Corrosion protection?
Kindest regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
A quick check on the Internet provided us with two suppliers/ manufacturers of staple cement in the United States. The web reference pages are below:
1) The Rohm and Haas Company
www.rohmhaas.com/
2)Dianal America, Inc. a division of Mitsubishi Rayon Co. Ltd.,
www.dianal.com/Coatings/applications.html
I trust this is all you need but we do have one academic question.
We were under the impression that Bekaert Dramix® steel filaments came loose in bags. Why is the staple cement used? Corrosion protection?
Kindest regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.087 seconds