How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
PCB's
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 10 months ago #696 by Archived Forum Admin
PCB's was created by Archived Forum Admin
I have been asked to find out what types of wires/cables contained PCBs in the insulation. We have found references to electric cables in naval ships that had PCBs in the insulation. We want to know if PCBs were used in the insulation of other specific types of wiring/cables. Or was the use of PCBs in the insulation specific to certain manufacturers? Any help you can provide regarding this typic will be greatly appreciated.
Auburn Steward, MLIS, AHIP
This email address is being protected from spambots. You need JavaScript enabled to view it.
Auburn Steward, MLIS, AHIP
This email address is being protected from spambots. You need JavaScript enabled to view it.
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #697 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: PCB's
Hello
It seems as if the use of PCB's in electrical insulation is associated with navy cable made during the second world war and and an early form of nuclear cable installed at Oak Ridge, TN during the same time period. That was sixty plus years ago and the information seems long gone.
Paper-oil underground (usually) power cable such as mass impregnated (Generally paper insulated lead sheathed cable or PILC.), high pressure pipe type cable and low pressure oil filled (LPOF) cable may have used PCBs as well long ago. These cable types may have also been contaminated by electrical utility oil filled transformers using PCBs.
The review WAI's list of paper cable manufacturers is as follows:
(1) Go to: www.wirenet.org/vts/vts_search.cfm
(2) Under "Product(s)", select "Power Cable-paper insulated" and:
(3) Press "Submit Query"
As far as the navy and the early nuclear cable go, you might ask the American "power cable-paper insulated" cable manufacturers to see if they can shed any more light on this subject because some of them historically manufactured navy cable and perhaps the early nuclear cable.
As far as other sources go, your best bet may be to keep searching the Internet using terms like "PCB contamination and wire and cable". OSHA and the Department of Defence may also be able to help you.
Sorry for the limited response but the information you are looking for was a long time ago and many large wire and cable companies have been sold, downsized or closed since then. Moreover I would imagine that many of the technical people who worked on these projects long ago have now passed on.
Kindest regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
It seems as if the use of PCB's in electrical insulation is associated with navy cable made during the second world war and and an early form of nuclear cable installed at Oak Ridge, TN during the same time period. That was sixty plus years ago and the information seems long gone.
Paper-oil underground (usually) power cable such as mass impregnated (Generally paper insulated lead sheathed cable or PILC.), high pressure pipe type cable and low pressure oil filled (LPOF) cable may have used PCBs as well long ago. These cable types may have also been contaminated by electrical utility oil filled transformers using PCBs.
The review WAI's list of paper cable manufacturers is as follows:
(1) Go to: www.wirenet.org/vts/vts_search.cfm
(2) Under "Product(s)", select "Power Cable-paper insulated" and:
(3) Press "Submit Query"
As far as the navy and the early nuclear cable go, you might ask the American "power cable-paper insulated" cable manufacturers to see if they can shed any more light on this subject because some of them historically manufactured navy cable and perhaps the early nuclear cable.
As far as other sources go, your best bet may be to keep searching the Internet using terms like "PCB contamination and wire and cable". OSHA and the Department of Defence may also be able to help you.
Sorry for the limited response but the information you are looking for was a long time ago and many large wire and cable companies have been sold, downsized or closed since then. Moreover I would imagine that many of the technical people who worked on these projects long ago have now passed on.
Kindest regards,
Peter Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.106 seconds