Wirenet Image Band
wirenet.org mobile image band
  1. Forum
  3. Technical Divisions
  5. Electrical
  7. Testing Cables
× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.

Testing Cables

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 10 months ago #589 by Archived Forum Admin
Testing Cables was created by Archived Forum Admin
I want to test electrical parameters of data cables like Attenuation, Cross talk and Characteristics Impedance with the HP 8751 A Network Analyzer using 100 Ohm baluns. Can some one provide the step wise method for testing the same.

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 10 months ago #590 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Testing Cables
Hello there,

I was going to suggest that you talk with a local representative from HP (Now sold to Agilent.) but unfortunately I learned that the HP/ Agilent 8751A was discontinued in November 1999 and active support was discontinued October 2004. The HP/ Agilent 8751A was replaced by the Agilent 4395A Network/Spectrum/Impedance Analyzer.

It may still be worth a try to deal with Agilent in this regard.

Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

Moderators: Erik A Macs, Peter J Stewart-Hay
  1. Forum
  3. Technical Divisions
  5. Electrical
  7. Testing Cables
Time to create page: 0.086 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777