How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
% coverage for braided cable
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 10 months ago #554 by Archived Forum Admin
% coverage for braided cable was created by Archived Forum Admin
My factory in Malaysia use to made some braided (tinned copper wire braid)screen cables, such as LiYCY CU/PVC/TCWB/PVC 300V. we use formula to calculate 80% coverage braiding for our cables,But is there any way to double check the 80% coverage for finish cables? Please help.
Larry
East-Mint Marketing
email:globalcablesupply@eastmint.com
www.eastmint.com
www.samakebel.com
Larry
East-Mint Marketing
email:globalcablesupply@eastmint.com
www.eastmint.com
www.samakebel.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #555 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: % coverage for braided cable
Larry,
Please tell me how you calculate the optical coverage.
May be we can give you support with your calculation program.
For double checking you can check the laylength. Do you use a mechanical change gear machine or electronic drives? Take a black marker and mark one of the carrier bunch. After braiding please measure the pitch and re-calculate. If you use the right program and all your values are right (intermediate diameter of product, wire size and more) you should be fine with the product.
You can call me (++1) 856 803 1824 or reach me by e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Best regards
Please tell me how you calculate the optical coverage.
May be we can give you support with your calculation program.
For double checking you can check the laylength. Do you use a mechanical change gear machine or electronic drives? Take a black marker and mark one of the carrier bunch. After braiding please measure the pitch and re-calculate. If you use the right program and all your values are right (intermediate diameter of product, wire size and more) you should be fine with the product.
You can call me (++1) 856 803 1824 or reach me by e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
Best regards
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.109 seconds