How to resolve AdBlock issue? × If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
Max pulling tension for multi-pair armoured cable
- Archived Forum Admin
-
Topic Author - Offline
- Platnium Boarder
-
Less More
12 years 10 months ago #551 by Archived Forum Admin
Max pulling tension for multi-pair armoured cable was created by Archived Forum Admin
can one advise me what formula to use to calculate the maximum pulling tension for multi-pair or multi-core instrumenation cable (armoured and AL foil screened)? Can i apply the same formula for fire resistant cable (armoured and screened)?
Larry
email:globalcablesupply@eastmint.com
www.eastmint.com
Larry
email:globalcablesupply@eastmint.com
www.eastmint.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #552 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Max pulling tension for multi-pair armoured cable
Hello Larry,
Pulling Tensions - Lots for you to read and understand. This is a good start:
www.southwire.com/processGetArticle.do?c...CM1000002702a8c0____
ieeexplore.ieee.org/Xplore/login.jsp?url....pdf?arnumber=328444
Pulling Around Bends
ecmweb.com/mag/electric_simple_calculations_cable/index.html
www.sfcommunications.com/cable_pull.htm
Cable Pulling Lubricants
www.polywater.com/2000tech.html (Software can be purchased)
cim.pennnet.com/Articles/Article_Display...ay&ARTICLE_ID=175831
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Pulling Tensions - Lots for you to read and understand. This is a good start:
www.southwire.com/processGetArticle.do?c...CM1000002702a8c0____
ieeexplore.ieee.org/Xplore/login.jsp?url....pdf?arnumber=328444
Pulling Around Bends
ecmweb.com/mag/electric_simple_calculations_cable/index.html
www.sfcommunications.com/cable_pull.htm
Cable Pulling Lubricants
www.polywater.com/2000tech.html (Software can be purchased)
cim.pennnet.com/Articles/Article_Display...ay&ARTICLE_ID=175831
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
-
12 years 10 months ago #553 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Max pulling tension for multi-pair armoured cable
thanks peter
larry
larry
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.082 seconds