Wirenet Image Band
wirenet.org mobile image band
× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.

What Is Partial Discharge Testing?

  • Oliver Brown
  • Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
More
1 year 9 months ago #3135 by Oliver Brown
What Is Partial Discharge Testing? was created by Oliver Brown
Partial Discharge (PD) are little electrical sparkles that happen inside the protection of medium and high voltage electrical testing resources. Each discrete fractional release is the aftereffect of an electrical breakdown of an air pocket inside the protection. These releases dissolve protection and in the end bring about protection disappointment.

www.techcorpservices.com.au/shop/pd-test...rge-detector/Partial Discharge Testing results from High Voltage Testing and Commissioning Company in Australia can help anticipate future execution and dependability of basic resources, including:
  • Cables, joins, and terminations
    Force transformers and bushings
    Switchgear
    Engines and generators

Please Log in to join the conversation.

More
1 year 5 months ago #3158 by Garry Ino
Replied by Garry Ino on topic What Is Partial Discharge Testing?
Hi....we have been utilizing PDSL (Partial Discharge Site Location) testing as a strategy to help direct support on our MV underground appropriation links. We haven't utilized it a lot for switchgear diagnostics, however (in light of the fact that somewhat, we hope to discover PD in air-protected stuff when testing above evaluated voltage).

Our dissemination voltages are 34.5kV and 12.47kV (stage to-stage), and we have had comparative outcomes at the two voltages, despite the fact that there are some extra difficulties at 34.5kV.

At first, we began to utilize PDSL as a methods for deciding the wellbeing and remaining existence of our links. We began to find, however, that on the off chance that we found any release produced from electrical trees in the link protection, we didn't have a lot of time left before the link fizzled (this is explicit to XLPE protection, unexpectedly). Ordinarily, the excess existence of a XLPE link with perceptible PD is in the domain of a couple of hours to a couple of days, contingent upon the incomplete release commencement voltage (PDIV) of the deformity and the recurrence of drifters in the ditribution framework that are probably going to surpass the PDIV.

Please Log in to join the conversation.

More
4 months 4 weeks ago - 4 months 4 weeks ago #3189 by Mr Rempel Jody
Replied by Mr Rempel Jody on topic What Is Partial Discharge Testing?
Partial discharge testing, often known as PD testing, is used to examine the health of electrical insulation. PD is best characterized as a failure of a component of an insulating system to tolerate an electrical field.

krunker
Last edit: 4 months 4 weeks ago by Mr Rempel Jody.

Please Log in to join the conversation.

Moderators: Erik A MacsPeter J Stewart-Hay
Time to create page: 0.165 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777