Wirenet Image Band
wirenet.org mobile image band
  1. Forum
  3. Technical Divisions
  5. Electrical
  7. Braiding
× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.

Braiding

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 10 months ago #233 by Archived Forum Admin
Braiding was created by Archived Forum Admin
what may the probable reason for rough braiding of tinned copper wire.

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 10 months ago #234 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Braiding
Hello vermadevanj,

I'm afraid you must be much more specific in terms of what "rough braiding" is. I presume your tinned copper wire was hot dipped. Please confirm.

Thank you.

Regards
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
519 641- 3212

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 10 months ago #235 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Braiding
If by "rough braiding" you mean some wires protruding away from the cable surface unevenly, it is a question of rewinding all wires on bobbins parallel with even tension...using a steel comb to guide the wires parallel may help..so will providing some bristles to provide mild back tension to wires.

naren kotecha

Please Log in to join the conversation.

Moderators: Erik A Macs, Peter J Stewart-Hay
  1. Forum
  3. Technical Divisions
  5. Electrical
  7. Braiding
Time to create page: 0.078 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777