How to resolve AdBlock issue? 
- Posts: 1
- Thank you received: 0
× Nonferrous topics such as copper and aluminum, annealing, etc. go here.
Heat treatment cycle reduction in super thermalrod
- Mr THOTIAL SUNDARAM
- Topic Author
- Offline
- Fresh Boarder
-
Less More
11 years 9 months ago - 11 years 9 months ago #2479 by Mr THOTIAL SUNDARAM
Heat treatment cycle reduction in super thermalrod was created by Mr THOTIAL SUNDARAM
I am in the process of developing super thermal aluminum alloy rod for STACIR conductor in my present work with Sterlite technologies ltd .INDIA.(ONE TYPE OF HTLS conductor)During rod manufacture, Zr in the level 0.23-0.25% is added in the solution treated condition to the aluminum melt. After the rod production in the continuous casting and rolling technique, it requires a heat aging cycle of 40-50 hrs duration to bring conductivity 60%IACS as of AT3 rod of IEC620004 category.
Can anybody know method for reducing the heat cycle duration or any other method to get without going heat aging/ annealing route.?-
Can anybody know method for reducing the heat cycle duration or any other method to get without going heat aging/ annealing route.?-
Last edit: 11 years 9 months ago by Peter J Stewart-Hay.
Please Log in to join the conversation.
- Juan Carlos del Rey Menéndez
- Offline
- Moderator
-
Less More
- Posts: 6
- Thank you received: 0
11 years 9 months ago #2480 by Juan Carlos del Rey Menéndez
Replied by Juan Carlos del Rey Menéndez on topic Heat treatment cycle reduction in super thermalrod
Hello all:
I encourage you to read the following article and draw conclusions.
www.imim.pl/files/archiwum/Vol3_2011/15.pdf
Best Regards
Juan Carlos del Rey Menéndez
I encourage you to read the following article and draw conclusions.
www.imim.pl/files/archiwum/Vol3_2011/15.pdf
Best Regards
Juan Carlos del Rey Menéndez
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.073 seconds